F.Ball Stopgap 1500

STOPGAP 1500 is a rapid-setting, fast-drying, water-mix smoothing compound designed for preparing sound internal subfloors prior to the installation of new floorcoverings. It can be applied directly over old adhesive residues—including bitumen and carpet tile tackifiers—without the need for priming.

How much do I need?Calculate your quantity

Measure your area

ESTIMATED QUANTITY

Enter your area

Area incl. allowance
—
Coverage per pack
—

Estimate only. Actual coverage varies with the substrate, flooring and application. Check the specified installation method.

Expert flooring support from your local team

Add to enquiry
F. Ball
Categories: , Brand:
PRODUCT OVERVIEW

F.Ball Stopgap 1500

Description

Product Overview

STOPGAP 1500 is a high-performance, water-mix smoothing compound developed for preparing sound internal subfloors prior to the installation of new floorcoverings. It is formulated for fast-track projects, offering rapid setting and drying characteristics that minimise downtime on site.

The compound can be applied directly over old adhesive residues such as bitumen and carpet tile tackifiers without the need for priming, improving efficiency during refurbishment work. It is also moisture tolerant, allowing application over damp substrates prior to the installation of surface membranes. STOPGAP 1500 provides excellent self-smoothing properties and is suitable for use in sensitive environments such as hospitals and clean rooms due to its low odour, protein-free formulation.

Key Features

  • Fast setting and fast drying for reduced downtime
  • Walk-on hardness from approximately 60 minutes
  • Ready to receive floorcoverings from approx. 4 hours
  • Application thickness from 2mm to 30mm
  • Can be applied directly over adhesive residues without priming
  • Moisture tolerant formulation for damp subfloors
  • Excellent self-smoothing properties for consistent finish
  • Protein-free and low odour, suitable for sensitive environments
  • Approved for marine and offshore installations

Applications

  • Smoothing internal subfloors prior to flooring installation
  • Preparation over concrete and sand/cement screeds
  • Application over old adhesive residues and tackifiers
  • Patch filling timber floors before overlaying with plywood
  • Use in hospitals, laboratories, and clean rooms
  • Commercial and residential flooring projects

Notes

  • Mix 20kg bag with approximately 5.0 litres of clean water
  • Mix using a power whisk for minimum 2 minutes to achieve smooth consistency
  • Apply using a steel smoothing trowel
  • Do not apply below 10°C substrate temperature
  • Underfloor heating must be off before, during, and after installation
  • Coverage will vary depending on subfloor condition and thickness

Technical Information

Technical Specifications:

Type Water-mix smoothing compound
Mix Ratio 20kg powder : 5.0L water
Working Time Not specified by manufacturer
Walk-On Time Approx. 60 minutes
Ready for Floorcoverings Approx. 4 hours
Application Thickness 2mm – 10mm (up to 30mm with aggregate)
Coverage (2–3mm) Approx. 5.0 m² per 20kg bag
Coverage (5mm) Approx. 2.5 m² per 20kg bag
Coverage (10mm) Approx. 1.3 m² per 20kg bag
Coverage (30mm) Approx. 0.5 m² per 20kg bag
Substrates Concrete, screed, terrazzo, asphalt, steel, tiles, resins
Moisture Tolerance Suitable for damp subfloors prior to membranes
Standards EN 13813 (CT-C16-F6), IMO Marine Approved
Pack Size 20kg bag

This compound is designed for fast-track flooring installations where time constraints are critical. Its ability to be applied over adhesive residues and damp substrates reduces preparation steps, improving efficiency while maintaining a high-quality finish.

Safety data sheet

Technical data sheet

REAL PEOPLE. FLOORING KNOW-HOW.

Let's get your next job sorted.

Product advice, order enquiries and support from your local team.

Find your nearest branch
Ready for your next job?View product
Share