F. Ball Stopgap Micro Rapid

F. Ball Stopgap Micro Rapid is a rapid-setting, flexible floor finishing compound for creating an ultra-smooth, feathered finish and repairing minor surface defects before floorcovering installation.

How much do I need?Calculate your quantity

Measure your area

ESTIMATED QUANTITY

Enter your area

Area incl. allowance
—
Coverage per pack
—

Estimate only. Actual coverage varies with the substrate, flooring and application. Check the specified installation method.

Delivery and Click & Collect options confirmed at checkout. View details

Expert flooring support from your local team

Add to enquiry
PRODUCT OVERVIEW

F. Ball Stopgap Micro Rapid

Description

Product Overview

F. Ball Stopgap Micro Rapid is a rapid-setting and rapid-drying cement-based finishing compound designed for fast-track internal flooring preparation.

It provides an ultra-smooth finish over suitable plywood and oil-tempered hardboard and can be used to cover board joints and screwheads. It is also suitable for repairing minor surface defects in existing floor smoothing compounds, sand/cement screeds, calcium sulphate screeds and other rigid, dry, absorbent surfaces.

The pre-blended powder is mixed with clean water and applied as a scratch coat or feathered edge without requiring a primer. Floorcoverings can be installed from approximately 20 minutes at 20°C, depending on the substrate and site conditions.

Its flexible and protein-free formulation also makes it suitable for use in biologically sensitive internal environments.

Key Features

  • Rapid-setting and rapid-drying formulation
  • Ready to receive floorcoverings from approximately 20 minutes
  • Creates an ultra-smooth surface finish
  • Can be applied to a feathered edge
  • Suitable for covering plywood and hardboard joints and screwheads
  • Repairs minor defects in suitable rigid, dry, absorbent subfloors
  • No primer required
  • Flexible and dimensionally stable
  • Protein-free formulation
  • EC1 Plus very low-emission rated
  • For internal applications

Applications

  • Creating a smooth finish over suitable plywood
  • Finishing suitable oil-tempered hardboard
  • Covering securely fixed board joints and screwheads
  • Forming feathered edges
  • Repairing minor surface defects in floor smoothing compounds
  • Repairing minor defects in sand/cement screeds
  • Repairing minor defects in calcium sulphate screeds
  • Finishing other rigid, dry and absorbent internal surfaces
  • Fast-track preparation before floorcovering installation

Notes

  • Ensure the surface is sound, dry and free from contaminants that could prevent adhesion
  • Subfloor moisture must be below 75% RH
  • Concrete and sand/cement screeds must be fully cured
  • Remove laitance and incompatible surface treatments before application
  • Maintain the floor temperature above 5°C throughout application and drying
  • Securely screw-fix plywood and hardboard substrates in accordance with applicable local standards
  • No priming is required
  • Mix two parts powder with one part clean water by volume
  • Add the powder to the water and mix by hand until a stiff, lump-free consistency is achieved
  • Do not exceed 4L of water per 8kg pouch
  • Mix only enough material to use within the 10-minute working time
  • Apply evenly using a suitable steel smoothing trowel
  • Clean tools with water immediately after use
  • For internal use only

Technical Information

Specification Details
Product Type Rapid-setting, flexible floor finishing compound
Form Pre-blended powder
Mixing Ratio 2 parts powder to 1 part clean water by volume
Maximum Water Addition 4L per 8kg pouch
Working Time Approximately 10 minutes at 20°C
Walk-On Hardness From approximately 20 minutes at 20°C
Ready for Floorcoverings From approximately 20 minutes
Standard Application Thickness Scratch coat to 1mm
Maximum Localised Thickness Up to 3mm, with extended drying time
Coverage – Scratch Coat Approximately 37.5m² per 8kg pouch
Coverage – 1mm Thickness Approximately 7.5m² per 8kg pouch
Consumption Approximately 1.06kg/m² per mm
Subfloor Moisture Requirement Below 75% RH
Minimum Floor Temperature Above 5°C
Classification CT-C16-F6 to EN 13813:2002
28-Day Compressive Strength Greater than 16N/mm²
28-Day Flexural Strength Greater than 6N/mm²
Pack Size 8kg pouch
Shelf Life 12 months in unopened pouches when correctly stored

Getting it to your next job

Delivery

Delivery options and freight charges are confirmed at checkout for your address and order.

Click & Collect

Choose an available collection store at checkout.

REAL PEOPLE. FLOORING KNOW-HOW.

Let's get your next job sorted.

Product advice, order enquiries and support from your local team.

Find your nearest branch
Ready for your next job?View product
Share