F. Ball Stopgap F77

F. Ball Stopgap F77 is a solvent-free, two-part epoxy waterproof surface membrane designed to control residual construction moisture and rising damp up to 98% RH in a one-coat application.

How much do I need?Calculate your quantity

Measure your area

ESTIMATED QUANTITY

Enter your area

Area incl. allowance
—
Coverage per pack
—

Estimate only. Actual coverage varies with the substrate, flooring and application. Check the specified installation method.

Expert flooring support from your local team

Add to enquiry
F. Ball
Categories: , Brand:
PRODUCT OVERVIEW

F. Ball Stopgap F77

Description

Product Overview

F. Ball Stopgap F77 is a high-performance, rapid-curing waterproof surface membrane designed to control residual construction moisture before the installation of floorcoverings.

Formulated as a solvent-free, two-part epoxy resin system, Stopgap F77 cures to form a waterproof barrier that impedes moisture and rising damp from affecting subsequent flooring installations.

The system is applied in a single coat and can be used where relative humidity readings are up to 98% RH, making it ideal for fast-track projects where floorcoverings need to be installed earlier.

Stopgap F77 is pigmented black, allowing installers to visually check coverage uniformity and confirm a continuous, pinhole-free coating across the floor.

Key Features

  • Solvent-free, two-part epoxy waterproof surface membrane
  • Controls residual construction moisture and rising damp up to 98% RH
  • One-coat application system
  • Rapid curing – ready from approximately 3 hours at 20°C
  • Black pigment helps visually confirm coverage uniformity
  • Suitable over underfloor heating screeds up to 90% RH
  • Allows earlier installation of floorcoverings in fast-track projects
  • Supplied as a pre-measured resin and hardener kit

Applications

  • Moisture control over concrete and cementitious screeds
  • Fast-track flooring installations where residual moisture is present
  • Projects requiring early installation of floorcoverings
  • Use before smoothing compounds and flooring adhesives
  • Underfloor heating screeds up to 90% RH
  • Commercial and residential subfloor preparation

Installation Notes

  • Apply to clean, absorbent, and properly prepared substrates
  • Remove contaminants, laitance, surface hardeners, and weak material before application
  • Power floated concrete must be mechanically prepared
  • New concrete should be left for a minimum of 7 days before preparation and application
  • Substrate surface strength should be greater than 1.5 N/mm²
  • Mix the full contents of hardener into the resin container and mix thoroughly
  • Apply immediately after mixing using the correct notched trowel and roller
  • Use V2 notch trowel for applications up to 98% RH or underfloor heating up to 90% RH
  • Use V1 notch trowel for applications up to 85% RH
  • Do not use over calcium sulphate screeds
  • Do not use where the subfloor is subject to hydrostatic pressure or osmosis

Technical Information

Specification Details
Product Type Two-part epoxy waterproof surface membrane
Moisture Control Up to 98% RH
Colour Black
Coverage 1.8m²/kg up to 98% RH or underfloor heating up to 90% RH; 2.5m²/kg up to 85% RH
Working Time Approx. 30 minutes at 20°C
Cure Time Approx. 3 hours at 20°C
Application Tools V1 or V2 notched trowel and roller
Substrate Requirement Clean, absorbent substrate with surface strength greater than 1.5 N/mm²
Storage 5°C to 30°C
Shelf Life 18 months in unopened containers
Packaging 14kg kit

Technical data sheet

REAL PEOPLE. FLOORING KNOW-HOW.

Let's get your next job sorted.

Product advice, order enquiries and support from your local team.

Find your nearest branch
Ready for your next job?View product
Share